Asphalt Calculator — Tons, Bags & Cost for Driveways

Enter your driveway size and depth and get tons, 50 lb bags and cost — asphalt runs about 145 lb per cubic foot, with a 5% waste allowance.

Quick answer

A 10×20 ft driveway, 3 in thick needs 3.63 tons of asphalt (3.625 exact).

Asphalt calculator

Results update as you type. Your numbers are saved in the page link, so you can bookmark or share them.

Units
Driveway & depth
ft
ft
in
Waste allowance
5%
Price (optional)
3.81
tons incl. waste
132
50 lb cold-patch bags
Exact tons (no waste)3.63 tons
Exact volume50 cu ft
Area200 sq ft

Includes a 5% waste allowance — adjust with the slider. Bag counts always round up to whole bags. Hot mix is ordered by the ton with a 1-ton minimum at most plants; bags are the expensive way to patch a small area.

How the asphalt calculator works

This calculator tells you how much asphalt you need for a driveway, parking pad, or patch, in two different units: tons of hot mix asphalt (the material you order from a plant or supplier) and 50 lb bags of cold-patch asphalt (the bagged repair product sold at home centers). It also estimates material cost using a price per ton that you enter. The calculator is built around one physical fact: compacted asphalt weighs about 145 lb per cubic foot. Once you know the volume of your project in cubic feet, everything else follows from that weight.

You enter four inputs. Length is the longest dimension of the area you're paving, in feet. Width is the shorter dimension, also in feet. Depth is the thickness of the finished asphalt layer, in inches — this is the compacted thickness you want after rolling, not the loose depth before compaction. Waste is a percentage added to cover uneven subgrade, spillage, and edge trimming; the default is 5%, which is reasonable for most rectangular driveways on a reasonably flat base.

The math, step by step

cubic feet = length (ft) × width (ft) × depth (in) ÷ 12
tons = cubic feet × 145 ÷ 2,000
50 lb bags = cubic feet ÷ 0.4 (round up)
  • Density: compacted asphalt runs about 145 lb per cubic foot — heavier than concrete (150 lb) is close, but asphalt is laid thinner.
  • Hot mix vs cold patch: hot mix is ordered by the ton from a plant (1-ton minimum); cold patch comes in 50 lb bags for small repairs, about 0.4 cu ft per bag.
  • Depth: 2 in is a standard overlay on a sound base; 3 in is typical for a new driveway; 4 in is for heavy vehicle traffic.
  • Waste: 5% covers uneven base and edge losses; add more for a rough or sloped base.
10 ft 20 ft 3 in thick (side view) driveway, top view
A 10 × 20 ft driveway, 3 in thick: 50 cu ft = 3.63 tons of asphalt (3.625 exact).

The formula runs in three steps.

Step one: convert depth to feet and find volume. Since you entered depth in inches, divide it by 12. Then multiply length × width × depth ÷ 12. A 10×20 ft area with 3 in of asphalt works out to 200 × 3 ÷ 12 = 50 cubic feet. That's the actual compacted volume of asphalt in the finished pavement.

Step two: convert volume to tons. Multiply cubic feet by 145 (the weight of one cubic foot of compacted asphalt, in pounds), then divide by 2,000 to get from pounds to tons: tons = cubic feet × 145 ÷ 2,000. For the 50 cubic foot example, that's 50 × 145 ÷ 2,000 = 3.625 tons, shown as 3.63. Asphalt is almost always ordered by the ton, so this is the number you'll give a supplier.

Step three: convert volume to bags, if you're using cold patch instead. One 50 lb bag of cold-patch asphalt covers roughly 0.4 cubic feet. Divide your cubic feet by 0.4 and round up to a whole bag: bags = ceiling of (cubic feet ÷ 0.4). For 50 cubic feet, that's 50 ÷ 0.4 = 125 bags. Cold patch is far more expensive per ton than hot mix, so it makes sense for potholes, edges, and small patches — not for paving a full driveway. If the bag count comes out in the hundreds, that's your signal to price hot mix instead.

On cost: the calculator multiplies your tons by the price per ton you enter. The default of $120/ton is a national planning figure, not a quote. Local plants set their own prices, and they move with oil prices, so always call your supplier for a real number.

Two practical tips. First, don't skip the waste allowance. Subgrade is rarely perfectly flat, and asphalt fills low spots before it builds thickness — a 5% allowance on a typical driveway is the difference between a pour that finishes and one that runs short while the truck waits. Running short is expensive; asphalt plants can't hold a partial load, and a second delivery means a second minimum charge. Second, remember depth is compacted thickness. If you rake hot mix out 4 in loose, it rolls down to roughly 3 in. Order based on the finished thickness you need, and check the depth guide in the tables below before you commit to a number.

Worked example: a 10 × 20 ft driveway, 3 in thick

Here is the full worked example for a 10×20 ft driveway at 3 in deep, with a 5% waste allowance and a planning price of $120/ton.

  1. Find the area: 10 ft × 20 ft = 200 sq ft.
  2. Convert depth to feet and find volume: 200 × 3 ÷ 12 = 50 cubic feet. This is the compacted volume of asphalt in the finished driveway.
  3. Convert to tons using the 145 lb per cubic foot weight: 50 × 145 ÷ 2,000 = 3.625 tons, shown as 3.63. With the 5% waste allowance the order volume is 3.81 tons — order at least 3.63 tons, since plants usually enforce a 1-ton minimum anyway.
  4. Convert to cold-patch bags if patching instead: one 50 lb bag covers about 0.4 cubic feet, so 50 ÷ 0.4 = 125 bags. Round up — never part-bags — so 125 bags covers the job.
  5. Estimate cost: 3.625 × $120 = $435.00 at the planning price of $120/ton. Treat this as a national planning range figure checked November 2026, not a quote. Local plant pricing varies, and delivery minimums apply.

Note the takeaway in step 4: 125 bags of cold patch is a lot of bags to haul, open, and tamp by hand. That volume of work is exactly where switching to hot mix from a plant pays off — one delivery, rolled with a plate compactor in an afternoon.

Quick reference tables

Speed sheetThe first table shows common driveway sizes with their volume, tonnage, and bag counts, all calculated with the same 145 lb/cu ft weight and 0

The first table shows common driveway sizes with their volume, tonnage, and bag counts, all calculated with the same 145 lb/cu ft weight and 0.4 cu ft per bag coverage used in the calculator.

The first table shows common driveway sizes with their volume, tonnage, and bag counts, all calculated with the same 145 lb/cu ft weight and 0
Driveway projectVolumeHot mix (tons)50 lb cold-patch bags
10×20 ft at 3 in50 cu ft3.63 tons125 bags
12×24 ft at 2 in (overlay)48 cu ft3.48 tons120 bags
20×20 ft at 3 in100 cu ft7.25 tons250 bags

The second table is a depth guide. Choose your depth input based on how the driveway will be used, and remember the base underneath matters as much as the asphalt on top. Also note: asphalt is ordered by the ton, and plants usually have a 1-ton minimum.

The second table is a depth guide
Use caseRecommended depth
Overlay / resurface1.5–2 in
New residential driveway2–3 in over 4–8 in of compacted gravel base
Heavy vehicles3–4 in

What asphalt costs

Asphalt pricing depends heavily on your distance from a plant and on oil prices, so treat all figures here as national planning ranges checked November 2026 — never quotes. The calculator's default planning price is $120/ton of hot mix. Using the worked example, a 10×20 ft driveway at 3 in needs 3.63 tons (3.625 exact), which is 3.625 × $120 = $435.00 in material at that planning price.

Two things move that number in real life. First, plant minimums: asphalt is ordered by the ton and plants usually have a 1-ton minimum, so small jobs carry proportionally higher cost per ton once delivery is added. Second, bagged cold patch costs far more per ton than hot mix, which is why it's practical for patches and potholes rather than full driveways — 125 bags for a 10×20 ft driveway tells you that story on its own. Call local suppliers for current tonnage pricing and delivery fees before you budget.

Frequently asked questions

How many tons of asphalt do I need for a 10×20 ft driveway at 3 inches?

At 3 in thick, a 10×20 ft driveway contains 50 cubic feet of compacted asphalt. Using the standard weight of 145 lb per cubic foot, that's 50 × 145 ÷ 2,000 = 3.625 tons, shown as 3.63. Asphalt is ordered by the ton and plants usually have a 1-ton minimum, so 3.63 tons is the number to give your supplier. Add your waste allowance on top if your base is uneven.

How many 50 lb bags of cold patch cover the same driveway?

One 50 lb bag of cold-patch asphalt covers about 0.4 cubic feet. For 50 cubic feet — the volume of a 10×20 ft driveway at 3 in — you'd need 50 ÷ 0.4 = 125 bags. That's a useful sanity check: when the bag count reaches 125 or more, hot mix delivered by the ton is almost always the better choice. Cold patch is best for potholes and small repairs.

Why does asphalt weigh 145 lb per cubic foot?

Asphalt is a dense mix of mineral aggregate and bitumen binder, and once it's compacted with a roller there is very little air left in it. That compaction gives it a planning weight of about 145 lb per cubic foot — heavier than most people expect. Suppliers and estimating guides use this same figure, which is why the calculator converts your volume to tons with cubic feet × 145 ÷ 2,000.

Should I use hot mix or cold-patch bags?

Cold patch in 50 lb bags is designed for potholes, edge repairs, and small patches — it's workable straight from the bag and doesn't need a plant or roller. Hot mix is ordered by the ton and needs compaction, but it costs far less per ton and gives a much better result for a full driveway. A good rule: if your project needs more than a handful of bags, price hot mix instead.

How thick should a new residential driveway be?

For a new residential driveway, plan on 2–3 in of compacted asphalt laid over 4–8 in of compacted gravel base. The base matters just as much as the asphalt: it carries the load and keeps the pavement from settling. If the driveway will see heavy vehicles such as trucks or RVs, increase the asphalt to 3–4 in. A resurfacing overlay over sound existing pavement only needs 1.5–2 in.

What is a waste allowance and why do I need one?

The waste allowance — 5% by default — covers real-world losses: uneven subgrade that fills with asphalt before it builds thickness, spillage during handling, and material lost trimming edges. Without it, many jobs run short, and running short is costly because plants can't hold partial loads and a second delivery triggers another minimum charge. Increase the allowance above 5% for rough or irregular bases.

Is the $120/ton price what I'll actually pay?

No. The $120/ton figure is a national planning price checked November 2026, used only to make the calculator's cost estimate meaningful. Real prices vary by region, plant, oil prices, and delivery distance, and plants usually enforce a 1-ton minimum. For the worked example, 3.625 tons × $120 = $435.00 as a planning number — call local suppliers for an actual quote before budgeting.

What is a compacted depth versus loose depth?

Compacted depth is the finished thickness after the asphalt has been rolled, and that's the number you should enter in the calculator. Hot mix is laid thicker than its finished height because rolling squeezes out air and densifies the mat — if you rake material out 4 in loose, it will compact down to roughly 3 in. Order tonnage based on the compacted thickness you need, not the loose depth you rake out.

Assumptions and limitations

  • Compacted asphalt weighs 145 lb per cubic foot, which is the standard planning weight for hot mix asphalt pavement.
  • Depth entered is the finished, compacted thickness; loose-laid asphalt compacts down when rolled.
  • One 50 lb bag of cold-patch asphalt covers approximately 0.4 cubic feet, and bag counts are rounded up to whole bags.
  • Waste allowance defaults to 5% to cover uneven subgrade, spillage, and edge loss; adjust for rough bases or irregular shapes.
  • The default price of $120/ton is a national planning figure checked November 2026, not a quote; actual plant pricing varies by region and delivery distance.
  • Areas are simple rectangles measured in feet; the calculator does not account for curves, slopes, or graded thickness variations.

Sources

  • Asphalt Institute — asphaltinstitute.org
  • QUIKRETE (cold-patch products) — quikrete.com
  • The Home Depot — homedepot.com
  • Lowe's — lowes.com

Last reviewed: November 20, 2026, by the YardMath Editorial Team. Formulas re-checked against manufacturer datasheets; national price ranges refreshed quarterly.