Gravel Calculator — Yards, Tons & Bags
Pick your stone type, enter area and depth, and get cubic yards, tonnage and bag counts — with a compaction allowance built in.
A 20×50 ft driveway at 4 in needs 12.3 cu yd ≈ 17.3 tons of crushed stone (before waste).
Gravel calculator
Results update as you type. Stone density changes the tonnage — pick your material or enter a custom value.
Includes a 10% allowance for spillage and compaction — crushed stone bases compact down 10–15% when tamped.
How the gravel calculator works
Gravel is ordered by the ton, but you measure a project in area and depth. The calculator bridges the two: volume first (square feet × depth ÷ 27 = cubic yards), then weight, using a density that depends on the stone. Crushed stone weighs more per yard than pea gravel; lava rock barely weighs anything at all.
The math, step by step
cubic yards = (area in sq ft × depth in inches) ÷ 324tons = cubic yards × stone density
- Densities used here: crushed stone 1.40, crushed limestone 1.45, generic gravel 1.35, pea gravel 1.30, river rock 1.25, lava rock 0.85 tons per cubic yard.
- Wet gravel weighs noticeably more than dry — suppliers quote dry tons, so trust the scale ticket.
- 0.5 cu ft bag: bags = cu ft ÷ 0.5 (about 54 bags per cubic yard).
- Compaction: tamped crushed stone settles 10–15%, which the allowance slider covers.
Depth is everything with gravel. Too thin and the stones disappear into the soil and mud within a season; too deep and loose stones never lock together. Driveways want 4–6 inches, ideally built in two lifts (a big 2–3 inch base layer compacted, then a 2–3 inch top layer of smaller stone). Walkways sit at 2–3 inches.
Worked example: a 3 × 30 ft garden walkway
- Area. 3 × 30 = 90 sq ft.
- Volume. (90 × 3) ÷ 324 = 0.83 cubic yards (22.5 cu ft).
- Tonnage. Pea gravel at 1.30 t/yd³: 0.83 × 1.30 = 1.08 tons.
- Allowance. 22.5 × 1.10 = 24.75 cu ft = 0.92 cu yd = 1.19 tons ordered.
- Decision. A single bulk scoop is 1.19 tons — but if delivery minimums or access make bulk awkward, 24.75 cu ft ÷ 0.5 = 49.5 → 50 bags of 0.5 cu ft. Bulk at $30/ton + $60 delivery ≈ $96; bagged at $5: 50 × $5 = $250. Bulk wins the moment delivery is possible.
Quick reference tables
CoverageWhat one ton covers (crushed stone, 1.40 t/yd³)
| Depth | Coverage per ton | Typical use |
|---|---|---|
| 2 in | ≈116 sq ft | Decorative beds, top-dressing |
| 3 in | ≈77 sq ft | Walkways |
| 4 in | ≈58 sq ft | Driveways (finished lift) |
| 6 in | ≈39 sq ft | Driveways (single heavy lift) |
Heavier stone (limestone 1.45) covers slightly less per ton; lighter rock (lava 0.85) covers far more.
| Stone | Size | Best for | Watch out |
|---|---|---|---|
| Pea gravel | 1/4–3/8 in | Walkways, play areas, topdressing | Rounds underfoot; migrates without edging |
| #57 crushed | 3/4–1 in | Driveway top layer, drainage | Sharp edges; needs a base lift below |
| #4 / base stone | 1.5–2 in | Driveway base lift, heavy loads | Rough to walk on |
| River rock | 1–2 in | Decorative beds, dry creek beds | Does not compact; rolls |
| Lava rock | 3/4–1.5 in | Light decorative cover, planters | Sharp; floats until wetted |
| Project | Depth | Notes |
|---|---|---|
| Driveway | 4–6 in | Two lifts, compacted each pass |
| Walkway | 2–3 in | Edging keeps stone contained |
| Paver base | 4–6 in | Crushed, dampened, compacted in lifts |
| Decorative bed | 2 in | Fabric underneath to block soil mixing |
| French drain trench | fills trench | Washed stone around the pipe |
Ordering and delivery: what to ask
Gravel deliveries go wrong at the logistics stage, not the math stage. Before you pay, ask the supplier four things: the minimum load (often 2–5 tons; a small project may be cheaper in bags), the price basis (per ton on the truck, or per ton spread — and is it estimated or scale-ticket weighed), the delivery access (where the dump gate can reach, and whether a low tree limb or narrow gate blocks it), and stone consistency (quarries blend; a "pea gravel" load can arrive noticeably larger than the sample). Plan where the pile goes — a ten-ton cone of stone on the driveway is a week of shoveling if it lands in the wrong spot. And schedule the compaction: a plate compactor rents by the hour, and a driveway base that is never compacted ruts in one season.
What gravel costs
Bulk: $15–$75 per ton depending on region and stone — crushed limestone sits at the low end in quarry country; decorative river rock and lava rock sit at the top. Delivery adds $50–$150 per load, and most suppliers have a 2–5 ton minimum. Bagged: $4–$7 per 0.5 cu ft bag, which works out to roughly $150–$270 per ton — three to ten times bulk pricing. Bags are for wheelbarrow-inaccessible beds and last-minute top-ups.
Pouring a slab over the base instead of loose stone? The concrete calculator prices that pour separately. Prices checked November 2026. Regional quarries swing the most — two suppliers 20 miles apart can differ by 40%. Get per-ton delivered quotes, and confirm whether the price is "per ton on the truck" or "per ton spread".
Ordering gravel: yards, tons and the truck scale
Gravel is quoted two ways, and both matter when you order. Cubic yards describe volume — what fills your driveway — while tons describe weight, and weight is what the quarry’s truck scale actually measures. The calculator converts your volume to tons using the density of the stone you picked, because a yard of pea gravel and a yard of dense crushed base do not weigh the same.
Because loads are billed in whole tons, the cost line here rounds your tonnage up before multiplying: a 17.3-ton job is billed as 18. Ask the quarry for the minimum load and the per-ton delivered rate — on jobs under three tons, delivery often costs more than the stone itself. If your estimate lands just under a whole number, it is usually cheaper to deepen the base by half an inch or extend the driveway a few feet than to pay for a half-empty truck.
Frequently asked questions
How many tons are in a cubic yard of gravel?
Between 1.3 and 1.5 tons for most stone: crushed stone ≈ 1.40, pea gravel ≈ 1.30, crushed limestone ≈ 1.45, river rock ≈ 1.25. Lava rock is the outlier at about 0.85 tons per yard.
How deep should a gravel driveway be?
4–6 inches total, built in two compacted lifts: a 2–3 inch base of larger crushed stone, then a 2–3 inch top of #57 or similar. A single thin layer ruts within a season or two.
How much area does a ton of gravel cover?
One ton of crushed stone (1.40 t/yd³) covers about 116 sq ft at 2 inches, 77 sq ft at 3 inches, or 58 sq ft at 4 inches. Lighter stones cover more per ton.
Pea gravel or crushed stone for a driveway?
Crushed stone. Its angular faces lock together and resist ruts; pea gravel is round, rolls under tires, and migrates to the lawn edges. Pea gravel is a walkway and decorative stone, not a driving surface.
Do I need landscape fabric under gravel?
For decorative beds, a geotextile fabric stops soil mixing up into the stone. For driveways and paver bases, use a proper geotextile separation fabric — it prevents the base from punching into soft subsoil. Plastic sheeting is not a substitute: it traps water.
How much does a load of gravel cost?
Bulk gravel runs $15–$75 per ton plus $50–$150 delivery, with 2–5 ton minimums common. A typical 10-ton driveway top-off therefore lands somewhere between $200 and $900 delivered depending on region and stone.
Can I put gravel straight on soil?
You can, but it disappears: soil works up between stones within a couple of seasons. Put down fabric, dig a shallow edge restraint, and give decorative beds their full 2 inches — or the gravel sinks to half of that by next year.
How much does a dump truck load of gravel weigh?
A typical single-axle delivery truck carries 5–10 tons; a full-size tandem-axle truck carries 12–20 tons. Suppliers rarely part-load, so order to the truck — the calculator's tonnage tells you whether your project is one load or two.
Assumptions and limitations
- Densities are typical quarry averages; moisture and stone mix shift real weights by several percent.
- The 10% default allowance covers compaction and spillage; fine crushed bases can compact up to 15%.
- Volume math assumes a flat, level project — slopes need extra material.
- Prices are national planning ranges checked November 2026, not quotes.
Sources
- Crushed stone and gravel bulk densities — quarry operator spec sheets and university extension tables.
- Local supplier price lists — bulk and bagged ranges, checked November 2026.
- FHWA / state DOT guidance — aggregate base compaction allowances.
Last reviewed: November 20, 2026, by the YardMath Editorial Team.