Tile Calculator — Tiles, Grout & Waste

Any tile size, any joint width: get the exact tile count, 25 lb grout bags and waste allowance for straight, diagonal or complex layouts.

Quick answer

A 10×10 ft room with 12×12 in tiles, 1/8 in joints needs 108 tiles with 10% waste.

Tile calculator

Tile count uses the true laying pitch — tile size plus grout joint — not the bare tile size.

Units
Room
ft
ft
Tile & joints
Waste allowance
Prices (optional)
108
tiles (rounded up)
1
25 lb grout bags
Room area
Tiles at exact fit (no waste)
Order area incl. waste
Laying pitch

10% waste allowance — cut tiles at walls, edges and around fixtures never come back out of the box.

How the tile calculator works

Tile is counted in pieces, and the number that matters is the laying pitch: tile size plus one grout joint, in both directions. A "12-inch tile" with 1/8-inch joints actually occupies 12.125 inches of floor every time it lands. Ignore the joint and you will be a row short — and short rows buy whole extra boxes.

The math, step by step

pitch = tile size + grout width
tiles (exact) = area in sq ft × 144 ÷ (pitch width × pitch height)
order = tiles × (1 + waste %)
  • Straight lay: 10% waste.
  • Diagonal: 15% — every perimeter tile is a triangle cut.
  • Complex layouts (herringbone, mixed sizes): 20%.
  • Grout: 25 lb bags, using the coverage table below for your tile size and joint width.
12 in + 1/8 in joint = 12.125 pitch 144 ÷ (12.125 × 12.125) = 0.98 tiles per sq ft
The joint is part of the tile: pitch = tile + grout width.

If the wall behind the tile needs paint first (kitchens and baths are usually painted before tiling), the paint calculator plans those gallons. Grout width is a design decision with structural rules: most floor tiles 12 inches and larger want 1/4-inch joints (or whatever the tile's spec sheet says — large-format tile often calls for wider joints to absorb tile size variation). Walls and mosaics typically run 1/16 to 1/8 inch with unsanded grout; sanded grout is for joints 1/8 inch and wider.

Worked example: a kitchen backsplash

  1. Area. 12 ft of counter × 1.5 ft tall = 18 sq ft.
  2. Pitch. 4 × 12 in subway tile with 1/16 in joints: 4.0625 × 12.0625 = 49.0 sq in per tile → 144 ÷ 49.0 = 2.94 tiles per sq ft.
  3. Exact count. 18 × 2.94 = 52.9 tiles.
  4. Waste. Running the backsplash in a brick (offset) pattern: 52.9 × 1.15 = 60.8 → buy 61 tiles.
  5. Grout. 18 × 1.15 = 20.7 sq ft at roughly 300 sq ft per 25 lb bag (small tile, 1/16 joint) → 1 bag, with plenty left for the next project.

Enter the room once and the tile, grout and cost lines update together — try switching the joint from 1/8 to 1/4 and watch the tile count move.

Quick reference tables

CountTiles per 100 sq ft

Exact tile count per 100 sq ft (1/8 in joints, before waste)
Tile sizeTiles per 100 sq ftWith 10% waste
6 × 6 in≈384≈423
12 × 12 in≈98≈108
12 × 24 in≈49≈55
18 × 18 in≈44≈49
24 × 24 in≈25≈28

Counts include grout joints in the pitch. Wider joints lower the count slightly.

Grout coverage per 25 lb bag (approximate, check your grout's chart)
Tile size1/16 in joint1/8 in joint1/4 in joint
6 × 6 in≈150 sq ft≈120 sq ft≈70 sq ft
12 × 12 in≈300 sq ft≈240 sq ft≈140 sq ft
12 × 24 in≈400 sq ft≈320 sq ft≈190 sq ft
18 × 18 in≈500 sq ft≈400 sq ft≈240 sq ft
24 × 24 in≈700 sq ft≈550 sq ft≈330 sq ft

Deeper grout lines (thicker tile) use more; the calculator interpolates for joint widths between these columns.

Planning the layout before you buy

Tile punishes improvisation, so do a dry layout — no mortar, just place — before the first cut. The goal: no cut tile narrower than half a tile at the visible wall, and no sliver cuts at doorways. If the room's width divided by the pitch leaves a two-inch sliver at one wall, shift the starting row so the cut splits evenly between opposite walls; that single decision changes the look more than the tile choice does. Mark the starting line with a chalk line snapped off your longest straight wall, and check it square with the 3-4-5 rule before committing. Buy the waste for the pattern you are actually laying, not the one you hope to lay — diagonal and herringbone layouts generate triangle offcuts that straight-lay never will. And open every box before install day: shade variation between production runs is normal in ceramic, and mixing boxes as you go hides it, while a last-box swap makes it obvious.

What tile costs

Material-only ranges (November 2026): ceramic $1–$8 per sq ft, porcelain $3–$10, natural stone $7–$20+. Sold per piece or per box — divide the box price by its coverage to get per-tile cost for the calculator. Grout runs $15–$25 per 25 lb bag; spacers a few dollars per hundred.

Installed tile adds $4–$12 per sq ft for labor, plus backer board if the subfloor needs it. Tile also hides a second project: old flooring removal and subfloor prep often cost more than the tile itself. Prices are planning figures — check local stores for current stock pricing.

Buying tile: pieces, bags and dye lots

Tile rounds up to whole pieces and grout to whole bags, and the waste percentage covers the cuts around door jambs, cabinet returns and the one row you will break on the first morning. Buy every box for a room from a single dye-lot code — the code printed on the box, not the color name, is what the kiln actually matched. Check the code on every box before the installer opens it, because mixed lots are visible forever in raking light and no discount unpurchases them.

Frequently asked questions

How many 12×12 tiles do I need for 100 square feet?

About 98 tiles at exact fit with 1/8-inch joints (the joints mean slightly fewer than 100 tiles fit). Add 10% waste and you buy 108. Diagonal layouts push it to about 113.

How much extra tile should I buy?

10% for a straight lay, 15% for diagonal, 20% for herringbone or mixed patterns. Cut tiles at walls, doorways and around fixtures cannot be returned, and dye lots make matching later batches risky.

How much grout do I need?

A 25 lb bag covers roughly 240 sq ft of 12×12 tile with 1/8-inch joints, or 140 sq ft at 1/4-inch joints. Smaller tiles and wider joints eat grout fast — use the coverage table above for your exact size.

Does tile size change how many tiles I need?

Yes, and not linearly. Larger tiles cover more area per piece but the fixed grout joints take a proportionally smaller bite, so fewer large tiles are needed per square foot — about 25 of the 24×24 tiles per 100 sq ft versus 98 of the 12×12.

What size spacers should I use?

Match your grout joint: 1/8-inch spacers for typical wall tile, 1/4-inch for most floor tile 12 inches and up. Large-format tile often specifies wider joints to handle size variation — check the spec sheet.

Can I tile over existing tile?

Sometimes, if the old tile is solid and well-bonded, with a bonding primer or thin-set designed for it. But you lose 1/4 inch of height at doorways and transitions — plan for transition strips or door trimming.

How many tiles are in a box?

Varies by product: a box of 12×12 ceramic often holds 10–15 tiles (10–15 sq ft); porcelain 12×24 ships 4–6 per box. The label always states square feet per box — divide to get your per-tile price.

What is the 3-4-5 rule for squaring a tile layout?

Measure 3 units along one wall and 4 along the other; the diagonal between those marks should be exactly 5 units. If it is, the corner is square and your chalk line is true. Scale the units up for bigger rooms — 6-8-10 works the same.

Assumptions and limitations

  • Tile counts assume a flat rectangular area; curves, thresholds and trim pieces are not included.
  • Grout coverage interpolates between typical manufacturer chart values; heavy-bodied or deep-joint grout uses more.
  • The calculator does not include backer board, thin-set mortar (roughly one 50 lb bag per 50–60 sq ft), sealer or spacers.
  • Price ranges are planning figures checked November 2026, not quotes.

Sources

  • Tile Council of North America (TCNA) handbook — joint width and substrate guidance.
  • Grout manufacturer coverage charts (Custom Building Products, Mapei) — approximated values above.
  • Big-box retailer listings — tile and grout pricing, checked November 2026.

Last reviewed: November 20, 2026, by the YardMath Editorial Team.