Sod Calculator — Rolls, Pallets & Cost

Enter your lawn size and get rolls, pallets and cost — one roll covers 10 sq ft, one pallet covers 500 sq ft, with a 5% waste allowance built in.

Quick answer

A 20×30 ft lawn needs 63 rolls of sod — about 2 pallets — with a 5% waste allowance.

Sod calculator

Results update as you type. Your numbers are saved in the page link, so you can bookmark or share them.

Units
Lawn dimensions
ft
ft
Waste allowance
5%
Price (optional)
63
rolls of sod (rounded up)
2
pallets (500 sq ft each)
Lawn area600 sq ft
Area with waste630 sq ft
Approx. weight1.26 tons

Includes a 5% waste allowance — adjust with the slider. Rolls and pallets always round up to whole units. Weight assumes about 40 lb per roll.

How the sod calculator works

This calculator tells you how many rolls of sod you need to cover a lawn, how many pallets that works out to, and what the material will cost. You enter the length and width of your lawn, a waste allowance (5% by default), and a price per square foot ($0.50/sq ft by default). The calculator handles the rest.

The math starts with the area. For a rectangular lawn, area = length × width. If your yard isn't a perfect rectangle, break it into rectangles, calculate each one, and add them together before moving on.

The math, step by step

area = length (ft) × width (ft)
with waste = area × (1 + waste %)
rolls = with-waste area ÷ 10 (round up)
pallets = with-waste area ÷ 500 (round up)
  • One roll: 2 ft × 5 ft = 10 sq ft, about 35–45 lb depending on moisture.
  • One pallet: 50 rolls = 500 sq ft, roughly 1,800–2,200 lb — a forklift or pallet jack job, not a wheelbarrow job.
  • Cost: material cost = base area × price per sq ft (waste rolls are a buffer, not a line item).
  • Irregular lawns: split the yard into rectangles, add the areas, then run the formula once on the total.
30 ft 20 ft lawn, top view — rolls laid in strips
A 20 × 30 ft lawn: 600 sq ft, 63 rolls with a 5% waste allowance, about 2 pallets.

Next comes the waste allowance. Real lawns have odd corners, curved beds, and sprinkler heads to cut around, and some rolls dry out or tear during handling. So the calculator multiplies your area by 1.05 to add a 5% cushion. That's the with-waste figure every other number builds on.

From there it's a matter of roll coverage. One roll of sod measures 2 ft × 5 ft, which is 10 sq ft. So rolls needed = with-waste area ÷ 10, rounded up — you can't buy a fraction of a roll, so any remainder means one more roll. The calculator uses the ceiling function (ceil) for this rounding.

Pallets work the same way. Sod is shipped on pallets of 50 rolls, and one pallet covers 500 sq ft. Pallets needed = with-waste area ÷ 500, rounded up again. If you're ordering a full pallet or more, the supplier will usually deliver by the pallet; smaller orders often get sold as individual rolls.

Cost is the simplest part. Material cost = area × price per square foot. Note that this uses your actual lawn area, not the with-waste figure — waste is extra rolls you may not install, so most homeowners budget the base area for cost and treat the surplus as insurance.

Two practical notes. First, sod is perishable; it should be laid within a day or two of delivery, so order for the week you're ready to install, not weeks in advance. Second, if you're converting from square meters or working with an irregular shape, use the square-footage guidance in the calculator's inputs to get your area right before applying the formula. Getting the area wrong is the most common mistake — measure twice, order once.

Measure each area of lawn separately with a tape measure, length by width, and sketch the yard on paper with the dimensions written down—if the space isn't a simple rectangle, break it into rectangles, measure each one, and add the areas together. Measure to the actual edge of the soil, not to a fence line or the edge of a patio, and double-check every dimension before you order, because a single misplaced foot across a 30 ft width changes the total by 30 sq ft, which is three full rolls. The most common mistakes we see: measuring to include beds, walkways, and other features that won't be sodded; forgetting that odd shapes leave offcut scraps you can't reuse anywhere; and assuming the roll count rounds down—since each roll covers 10 sq ft and a pallet holds 50 rolls or 500 sq ft, you always round up to the next whole roll and pallet. A 5% waste allowance handles normal cutting losses on straightforward rectangular lawns, which is why the default 20×30 ft lawn works out to 63 rolls across 2 pallets. Bump the allowance to around 10% for yards with many corners, curves, islands, or diagonal edges, where offcuts pile up fast; you can usually get away with little or no extra on one clean rectangle, but never skip the allowance entirely on anything irregular. If you're between pallets after adding waste, it's often cheaper to order the extra pallet than to leave a strip bare—sod is a living product with a short shelf life, and a mismatched partial delivery a week later rarely blends in. On price, material alone runs $0.35–$0.60 per sq ft for Bermuda and $0.40–$0.70 for fescue, up to $0.50–$0.85 for zoysia and $0.45–$0.75 for Kentucky bluegrass; budget delivery of $75–$150 per pallet order and, if you're not laying it yourself, installation labor of $0.80–$1.50 per sq ft on top of the material cost. Order for delivery the day you plan to unroll it, and have the soil graded and ready first—stacked pallets waiting on an unprepared yard is how good sod goes bad.

Worked example: a 20 × 30 ft lawn

Here's the worked example for a 20×30 ft lawn, which matches the calculator's default dimensions.

  1. Calculate the area. Area = L × W = 20 ft × 30 ft = 600 sq ft.
  2. Add the 5% waste allowance. 600 × 1.05 = 630 sq ft. This is the with-waste figure you'll use for ordering.
  3. Convert to rolls. Each roll covers 10 sq ft. 630 ÷ 10 = 63 exactly, so you need 63 rolls. If the division didn't come out even, you'd round up to the next whole roll.
  4. Convert to pallets. One pallet holds 50 rolls and covers 500 sq ft. 630 ÷ 500 = 1.26, and rounding up gives 2 pallets. That means you'd order a bit more than one full pallet's worth — suppliers typically deliver this as 2 pallets with the second one partially loaded, or as a pallet plus loose rolls.
  5. Calculate material cost. At the default price of $0.50/sq ft: 600 × $0.50 = $300 in sod. Remember this uses the base 600 sq ft, not the 630 sq ft with-waste figure — the extra 30 sq ft of rolls is your buffer, not a line item you necessarily pay to install.

So the quick answer for a 20×30 ft lawn: 63 rolls, about 2 pallets, roughly $300 in material at $0.50/sq ft — before delivery and installation, which are covered in the cost section below.

Quick reference tables

Speed sheetLawn area to rolls and pallets (5% waste allowance included)

Table 1 — Lawn area to rolls and pallets (5% waste allowance included):

Lawn area to rolls and pallets (5% waste allowance included)
Lawn areaRolls neededPallets needed
100 sq ft111
250 sq ft271
500 sq ft532
1,000 sq ft1053
2,000 sq ft2105
5,000 sq ft52511

Table 2 — Typical sod prices by grass type (material only, checked November 2026):

Typical sod prices by grass type (material only, checked November 2026)
Grass typePrice per sq ft
Bermuda$0.35–$0.60
Kentucky bluegrass$0.45–$0.75
Zoysia$0.50–$0.85
Fescue$0.40–$0.70

What sod costs

Sod pricing starts with the grass type. Warm-season varieties like Bermuda run $0.35–$0.60/sq ft, while fescue sits at $0.40–$0.70/sq ft. Kentucky bluegrass costs $0.45–$0.75/sq ft, and zoysia is typically the priciest at $0.50–$0.85/sq ft. These are national planning ranges for material only — not quotes — and were checked in November 2026. Your local supplier's price will vary with region and season.

Budget two extras beyond the sod itself. Delivery often runs $75–$150 per pallet order, which matters more on small jobs where the fee is a bigger share of the total. And if you're hiring out the work, installation adds $0.80–$1.50/sq ft on top of the material — often more than the sod itself.

Using the default example, a 20×30 ft lawn at the $0.50/sq ft default works out to $300 in material, before delivery and installation.

Frequently asked questions

How many rolls of sod do I need for a 20×30 ft lawn?

A 20×30 ft lawn is 600 sq ft. With the 5% waste allowance that becomes 630 sq ft, which works out to 63 rolls of sod — about 2 pallets, since 630 ÷ 500 rounds up.

What formula does the calculator use?

Area = L × W. With waste, multiply by 1.05. Then rolls = with-waste area ÷ 10, rounded up, and pallets = with-waste area ÷ 500, rounded up. One roll measures 2×5 ft and covers 10 sq ft; one pallet holds 50 rolls and covers 500 sq ft.

Why is there a 5% waste allowance, and can I change it?

The 5% covers cuts around edges, beds, and odd shapes, plus a few damaged rolls. It's built in by default, and you can adjust it on the calculator if your layout is simple or unusually cut-heavy.

How much sod comes on a pallet?

One pallet holds 50 rolls, and each roll covers 10 sq ft, so a full pallet covers 500 sq ft of lawn.

How much does sod cost for a 20×30 ft lawn?

At the default price of $0.50/sq ft, the material for a 600 sq ft lawn costs $300. That's material only — delivery and installation are extra.

What does sod cost per square foot by grass type?

Material prices as of Nov 2026: Bermuda runs $0.35–$0.60/sq ft, fescue $0.40–$0.70, Kentucky bluegrass $0.45–$0.75, and zoysia $0.50–$0.85. Delivery often adds $75–$150 per pallet order, and professional installation adds $0.80–$1.50/sq ft.

How many pallets do I need for larger lawns?

From the calculator's table: 500 sq ft needs 53 rolls or 2 pallets, 1,000 sq ft needs 105 rolls or 3 pallets, 2,000 sq ft needs 210 rolls or 5 pallets, and 5,000 sq ft needs 525 rolls or 11 pallets. Even 100 sq ft needs 11 rolls, and 250 sq ft needs 27 — small lawns still take a full pallet or more once waste is added.

Any tips before I order?

Measure your lawn carefully and enter your actual dimensions rather than guessing. Plan to lay sod soon after delivery, since it doesn't store well on a pallet. Confirm delivery fees with your supplier — they often run $75–$150 per pallet order on top of the per-square-foot material price.

Assumptions and limitations

  • One roll of sod measures 2 ft × 5 ft and covers 10 sq ft.
  • One pallet holds 50 rolls and covers 500 sq ft.
  • A 5% waste allowance is added to your lawn area to cover cutting, trimming, and damaged rolls; you can adjust this input.
  • Rolls and pallets are always rounded up to whole units — partial rolls and partial pallets aren't sold.
  • Material cost is calculated on your base lawn area (before the waste allowance), not the with-waste total.
  • Default inputs are a 20×30 ft lawn, 5% waste, and $0.50/sq ft pricing; price ranges shown are national planning figures, not quotes.

Sources

  • Turfgrass Producers International — turfgrassproducers.org
  • The Home Depot — homedepot.com
  • Lowe's — lowes.com
  • Super-Sod — supersod.com

Last reviewed: November 20, 2026, by the YardMath Editorial Team. Formulas re-checked against manufacturer datasheets; national price ranges refreshed quarterly.