Deck Stain Calculator — Gallons Needed & Cost
Enter your deck size and get gallons of stain — new wood takes about 200 sq ft per gallon, recoats about 300, with one or two coats.
A 12×16 ft deck needs 2 gallons of stain for two coats on new wood.
Deck stain calculator
Results update as you type. Your numbers are saved in the page link, so you can bookmark or share them.
Gallons always round up to whole gallons — a half-gallon short means a second trip. Railings and steps add roughly 25% more area; add them to your length and width if they are large. Always check the coverage on the can — it varies by brand and wood species.
How the deck stain calculator works
This calculator tells you how many gallons of deck stain to buy for your project. You enter the length and width of your deck, whether the wood is new or already finished, how many coats you plan to apply, and the price per gallon. The calculator returns the gallons needed and the approximate cost.
The inputs matter because stain coverage changes a lot depending on the situation. New, bare wood soaks up stain like a sponge, so it covers less surface per gallon — about 200 square feet per gallon for the first coat. A recoat goes over wood that is already sealed or stained, so it spreads farther, about 300 square feet per gallon. If you pick the wrong coverage number, your estimate will be off by a gallon or more, which is either money wasted or a second trip to the store mid-job.
The math, step by step
gallons = deck area (sq ft) ÷ coverage per gallon × coats (round up)new wood: 200 sq ft per gallon · recoat: 300 sq ft per gallon
- New wood drinks stain: bare boards absorb far more on the first coat — about 200 sq ft per gallon — and less on the second.
- Recoats go further: sealed wood takes about 300 sq ft per gallon, and one coat is usually enough.
- Two coats on new wood: the standard for a new deck — the first coat soaks in, the second builds the finish.
- Railings and steps: add roughly 25% more area if your deck has a lot of railing — measure the railing faces separately if they are large.
Coats matter just as much. Two coats roughly doubles the amount of stain compared to one, because each coat covers the full surface. Most new decks get two coats; a maintenance recoat usually needs one.
The formula is simple:
gallons = ceil(area ÷ coverage × coats)
In plain words: take your deck's square footage, divide it by the coverage rate for your situation, multiply by the number of coats, and round up to the next whole gallon. The rounding-up step is deliberate — stain is sold by the gallon, and you should not plan on scraping the last bit from a can. The default inputs are a 12 ft × 16 ft deck, which is 192 square feet, new wood at 200 square feet per gallon, two coats, and a price of $45 per gallon.
One thing the formula does not cover: railings and steps. They add roughly 25 percent more area to a typical deck, and stain absorbs differently on vertical surfaces and handrails. If your railings and steps are large, measure them separately and add their square footage to your deck area before running the numbers. A standard railing setup on a 192 square foot deck is usually small enough that the rounding-up step absorbs it, but a wraparound railing or wide stair set can push you into the next gallon.
Coverage also varies by product type, not just by whether the wood is new. Transparent stains cover the most per gallon, solid stains cover the least, and oil-based products fall on the low end. The numbers in this calculator are planning figures. Always check the label on the can you actually buy, because coverage changes by brand, thickening, and wood species. Dense woods like mahogany and ipe absorb less stain than pine or cedar, which stretches your coverage. Rough-sawn or weathered wood does the opposite and drinks more.
New wood and a previously stained deck do not absorb stain at the same rate, which is why this calculator uses two different coverage figures. Bare, weathered, or freshly sanded wood soaks up stain, so a gallon covers less of it — about 200 sq ft per gallon on the first coat. Wood that already has a coat of stain on it is sealed and much less porous, so a recoat stretches further, around 300 sq ft per gallon. If you are unsure which situation you have, assume new-wood coverage; you may end up with a little extra stain, which is better than running out partway through the job.
Product type changes those numbers too. Transparent stains are the thinnest and soak in most, so they cover the most area per gallon, roughly 250–350 sq ft. Semi-transparent stains land in the middle at about 200–300 sq ft per gallon. Solid stains are thicker and sit more on the surface, covering around 200–250 sq ft per gallon. Oil-based products cover the least, at about 150–250 sq ft per gallon, because they are heavier and penetrate deeply. These ranges overlap, and where your actual coverage falls within a range depends on the brand and on your wood — dense species like cedar absorb differently than softer pine, and rough or dry boards drink up more stain than smooth ones.
Railings and steps add area that people often forget. Horizontal stair treads, vertical balusters, and rail boards are small individually, but together they can add roughly 25% more stainable surface to your project. If your deck has wide steps or a long railing run, measure those surfaces separately and add them to your deck floor area rather than relying on a rough allowance.
Finally, treat every coverage number as an estimate until you read the label on the actual can you plan to buy. Manufacturers test their own formulas, and coverage varies by brand and wood species even within the same product category. The figure printed on the can is the one to use in the calculator if it differs from the defaults here, because it reflects how that specific stain behaves.
Worked example: a 12 × 16 ft deck
Here is the worked example for a 12 ft × 16 ft deck with new wood and two coats.
- Deck area: 12 ft × 16 ft = 192 square feet.
- Coverage for new wood: 200 square feet per gallon (first coat on bare wood).
- Coats: 2.
- Gallons before rounding: 192 ÷ 200 × 2 = 1.92 gallons.
- Round up to the next whole gallon: ceil(1.92) = 2 gallons.
- Cost at $45 per gallon: 2 × $45 = $90.
- Deck area: same 192 square feet.
- Coverage for a recoat: 300 square feet per gallon.
- Coats: 1.
- Gallons before rounding: 192 ÷ 300 = 0.64 gallons.
- Round up: ceil(0.64) = 1 gallon.
The difference is worth noting. The same physical deck needs 2 gallons for two coats on new wood but only 1 gallon for a single recoat, because the recoat spreads about 50 percent farther per gallon and you are applying half as many coats. If you stain the deck again in a few years, plan on 1 gallon, not 2 — assuming the railings and steps are modest. If your railing and stair area is large, measure it and add roughly 25 percent more area to be safe.
Quick reference tables
Speed sheetGallons needed by deck size
Gallons needed by deck size
| Deck size | New wood, 2 coats | Recoat, 1 coat |
|---|---|---|
| 192 sq ft | 2 gal | 1 gal |
| 300 sq ft | 3 gal | 1 gal |
| 500 sq ft | 5 gal | 2 gal |
Typical coverage by stain type
| Stain type | Coverage |
|---|---|
| Transparent stain | ≈ 250–350 sq ft/gal |
| Semi-transparent | ≈ 200–300 sq ft/gal |
| Solid stain | ≈ 200–250 sq ft/gal |
| Oil-based | ≈ 150–250 sq ft/gal |
What deck stain costs
Stain pricing varies by product type and quality, so treat the cost figure as a planning number, not a quote. The $45 per gallon used in this calculator sits within national planning ranges checked November 2026. At that price, the worked example — 2 gallons for a 192 square foot deck with two coats on new wood — comes to $90.
Your actual cost moves with the product you choose. Transparent and semi-transparent stains often cost more per gallon than basic solid stains, but they also cover more square feet, which can offset the higher price. Oil-based products usually sit at the higher end per gallon. Buy one gallon more than the calculation says if your deck has large railings or steps, and keep leftover stain for touch-ups — it stores well if sealed tightly and stored above freezing. Prices also swing by region and retailer, so check the label price at your local store before you commit.
Frequently asked questions
How many gallons of stain do I need for a 12×16 deck?
A 12×16 ft deck is 192 square feet. For two coats on new wood at 200 square feet per gallon, that works out to 2 gallons. For a single recoat at 300 square feet per gallon, 1 gallon is enough.
How much does it cost to stain a 12×16 deck?
Using the $45 per gallon planning figure, 2 gallons for two coats on new wood comes to $90. Treat this as a planning range checked November 2026, not a quote — actual prices vary by product and retailer.
How many square feet does a gallon of deck stain cover?
It depends on the situation and the product. New bare wood absorbs stain, so the first coat covers about 200 square feet per gallon. A recoat over finished wood covers about 300 square feet per gallon. By product type, transparent stains run roughly 250–350 square feet per gallon, semi-transparent 200–300, solid stain 200–250, and oil-based 150–250.
Do I need one coat or two coats of deck stain?
Most new decks get two coats, since bare wood soaks up the first coat. A maintenance recoat over already-finished wood usually needs just one. Two coats on new wood doubles the gallons compared to one coat at the same coverage rate.
Does stain coverage differ for new wood versus a recoat?
Yes, significantly. New wood soaks up stain and covers about 200 square feet per gallon on the first coat. A recoat goes over sealed or stained wood and spreads farther, about 300 square feet per gallon. Using the wrong rate will throw off your estimate by a gallon or more.
How do I account for railings and steps?
Railings and steps add roughly 25 percent more area to a typical deck. If yours are large, measure them separately, add the square footage to your deck area, and run the calculation again. On a small deck, the rounding-up step often absorbs the extra area on its own.
Should I round up or down when buying stain?
Always round up to the next whole gallon. The formula uses ceil — for example, 1.92 gallons becomes 2 gallons. Stain is sold by the gallon, and planning to scrape the last bit from a can is a recipe for a second trip to the store.
Why does my stain can show different coverage than the calculator?
The calculator uses planning averages. Actual coverage varies by brand, thickening, and wood species — dense woods absorb less stain and stretch coverage, while rough or weathered wood drinks more. Always check the label on the can you actually buy and adjust your math if it differs.
Assumptions and limitations
- Deck area is calculated as length × width in feet, giving square footage of the walking surface only; railings and steps are excluded unless you add them separately.
- New, bare wood absorbs about 200 square feet per gallon on the first coat; a recoat over finished wood covers about 300 square feet per gallon.
- The number of coats is applied evenly across the entire deck surface, and each coat covers the full area.
- Gallons are always rounded up to the next whole gallon, since stain is sold by the gallon and partial-can plans are unreliable.
- Railings and steps add roughly 25 percent more area to a typical deck; measure them separately if they are large.
- Coverage rates are planning averages — actual coverage varies by brand, product type, and wood species, so check the can label before buying.
Sources
- Sherwin-Williams — stain product coverage data and application guidance (sherwin-williams.com)
- Benjamin Moore — stain coverage ratings per gallon and prep instructions (benjaminmoore.com)
- BEHR — deck stain coverage specifications and recoat guidance (behr.com)
- The Home Depot — deck stain product listings and published coverage per gallon (homedepot.com)
Last reviewed: November 20, 2026, by the YardMath Editorial Team. Formulas re-checked against manufacturer datasheets; national price ranges refreshed quarterly.