Drywall Calculator — Sheets, Screws, Tape & Mud
Enter the room once: get whole sheets for any board size, the screws and tape to hang them, and the gallons of joint compound to finish.
A 12×14 ft room with 8 ft ceilings needs 19 sheets of 4×8 drywall, 646 screws, 475 ft of tape and 5 gallons of mud.
Drywall calculator
Sheets, screws, tape and joint compound for walls and ceiling — doors and windows deducted.
Rules of thumb: ~34 screws and ~25 ft of tape per sheet; ~130 sq ft of finish per gallon of compound (three coats). Doors 18 sq ft, windows 12 sq ft.
How the drywall calculator works
Drywall is bought in whole sheets, and sheets never divide evenly into a room. The calculator measures the wall and ceiling area the way a hanger does, deducts doors and windows, adds a waste allowance for cut-offs around openings, and converts the total into whole sheets — then estimates the screws, tape and joint compound that hang with them.
The math, step by step
wall area = (length + width) × 2 × height − openingstotal = wall area + ceiling (optional), then × (1 + waste %)
sheets = total ÷ sheet area (rounded up)
- Openings: a door deducts 18 sq ft, a window 12 sq ft (typical interior sizes with frame).
- Screws: about 34 per 4×8 sheet (12 in field, 16 in edges, staggered).
- Tape: roughly 25 linear ft of joint per sheet — a 500 ft roll per room of this size.
- Joint compound: about 130 sq ft of finished wall per gallon across three coats (tape coat, fill, skim).
Worked example: a 10 × 12 bedroom with ceiling
- Walls. (10 + 12) × 2 × 8 = 352 sq ft, minus one door (18) and one window (12) = 322 sq ft.
- Ceiling. 10 × 12 = 120 sq ft. Total = 442 sq ft.
- Waste. 442 × 1.10 = 486 sq ft to cover.
- Sheets. 486 ÷ 32 = 15.2 → 16 sheets of 4×8.
- Hardware. 16 × 34 = 544 screws (a 5 lb bucket holds ~1,500 — buy the small tub); 16 × 25 = 400 ft of tape (one 500 ft roll).
- Mud. 442 ÷ 130 = 3.4 → 4 gallons of all-purpose compound (or one 4.5 gal box).
Swap the sheet size to 4×12 and the same room takes 12 sheets with fewer joints to tape — heavier to hang alone, but faster to finish. The sheet-size selector above shows both counts instantly.
Quick reference tables
SheetsSheet sizes and coverage
| Sheet | Area | Sheets per 100 sq ft | Best for |
|---|---|---|---|
| 4 × 8 ft | 32 sq ft | 3.2 | Small rooms, DIY handling |
| 4 × 9 ft | 36 sq ft | 2.8 | 9 ft walls in one row |
| 4 × 10 ft | 40 sq ft | 2.5 | 10 ft walls, fewer joints |
| 4 × 12 ft | 48 sq ft | 2.1 | Long runs; two-person hang |
| Type | Thickness | Where it goes |
|---|---|---|
| Standard | 1/2 in | Walls and ceilings of ordinary rooms |
| Fire-rated (Type X) | 5/8 in | Garages, furnace rooms, shared walls — check code |
| Moisture-resistant | 1/2 in | Bathrooms, laundry (not shower surrounds) |
| Flexible | 1/4 in | Curves and gentle arches |
| Item | Rate | Sold as |
|---|---|---|
| Screws (coarse, walls) | 34 per sheet | 1 lb ≈ 300 screws; 5 lb tub |
| Screws (ceiling) | 38 per sheet | 1-5/8 in for ceilings |
| Joint tape | 25 ft per sheet | 150 ft or 500 ft rolls |
| Joint compound | 130 sq ft / gal | 1 gal, 4.5 gal boxes |
Install-day order of operations
Drywall goes up in a sequence that the sheet count does not show: ceiling first, then top wall rows, then bottom rows, so each joint lands on framing and the wall boards support the ceiling edge. Run ceiling boards perpendicular to the joists where possible — shorter spans sag less. Mark stud and joist centers on the floor and ceiling before the first sheet, hang screw lines in one pass with a dimpling bit (the screw head just below the paper, not through it), and stagger vertical joints row to row so no four corners meet. Keep the 1/4-inch gap at the floor for the baseboard to hide, cut openings a quarter-inch large and fix them with the box's offcuts rather than fighting a tight fit. Order the consumables with the board: the right screw length for your framing, a 500 ft tape roll, and the compound you will actually finish with — all-purpose for tape and fill, topping compound for the final skim if you want a better finish.
What drywall costs
Standard 1/2 in 4×8 sheets run $12–$20 each; 5/8 in fire-rated and moisture-resistant boards $16–$28. A 16-sheet room is therefore $200–$320 in board, plus $10–$15 in screws, $6–$10 in tape, and $15–$25 in compound — call it $240–$370 in materials for a 10×12 room, walls and ceiling.
Hanging and finishing is where money moves: hired pros charge $1.50–$3.50 per sq ft hung and finished, so that same room quotes $700–$1,600. Level 4 vs Level 5 finish, texture, and ceiling height all move the quote. Prices checked November 2026; board prices swing with demand, so price the week you buy.
Sheets, screws and the mud timeline
Drywall rounds up to whole sheets, but the offcuts are not waste — the piece cut from a closet wall returns as a patch for a soffit or a window return, which is why a modest waste percentage is honest here. Mud and tape follow the sheet count: one gallon of all-purpose compound and roughly 35 feet of tape per sheet covers a typical room’s seams, and the three-coat schedule (tape coat, fill coat, finish coat) needs overnight drying between passes, so a 19-sheet room is a three-day job before sanding even starts.
Buy screws in a five-pound box for anything over ten sheets — the little one-pound tubs run out exactly halfway through a ceiling. And stack sheets flat, never on edge: drywall stored upright for a week takes a bow that no screw will pull back.
Frequently asked questions
How many drywall sheets for a 12×12 room?
Walls: (12+12)×2×8 = 384 minus one door and one window (30) = 354; ceiling adds 144 → 498 sq ft. With 10% waste: 548 sq ft ÷ 32 = 17.1 → 18 sheets of 4×8.
How many screws per sheet of drywall?
About 34 for a 4×8 wall sheet — 12 inches apart in the field, 16 inches at edges, staggered between sheets. Ceilings run slightly more and use 1-5/8 inch screws.
How much joint tape do I need?
Roughly 25 linear feet per 4×8 sheet — one 500 ft roll finishes an average room. Longer boards (4×12) reduce joints and tape.
How much joint compound for a room?
About 130 sq ft of finished wall per gallon across three coats. A 10×12 room with ceiling (442 sq ft) takes ~4 gallons — one 4.5 gallon box. Texture and level-5 finishes can double that.
5/8 or 1/2 inch drywall?
1/2 inch is the all-purpose choice for walls and ceilings. 5/8 in (Type X) is code-required between living space and garages or furnaces, resists sagging on 24-inch ceiling joists, and quiets rooms.
Do I need moisture-resistant drywall in a bathroom?
Yes on bathroom walls and ceilings (green board or similar). Inside the shower or tub surround itself, use cement board — moisture-resistant drywall is not rated for wet areas.
Should ceilings be hung before walls?
Yes — standard practice is ceiling first, then walls, so wall sheets support the ceiling edges. Vertical wall joints should land on framing, staggered row to row.
How do I calculate drywall for a whole house?
Run this calculator per room and add the sheet counts — sheet counts add cleanly because waste is per-room. Keep one spare sheet per room for future patching.
Do ceilings need special screws?
Yes — ceiling sheets take 1-5/8 inch screws into joists and run slightly more fasteners per sheet than walls. Sagging ceiling boards on 24-inch joist spacing are the classic under-screwed failure; some pros switch those ceilings to 5/8-inch board for stiffness.
Assumptions and limitations
- Openings use standard interior sizes (door 18 sq ft, window 12 sq ft); sliding doors and large openings differ.
- Sheet counts round up per whole sheets but do not optimize cut layouts — real hangers can sometimes do better.
- Screws, tape and compound are rule-of-thumb rates; heavy texture or level-5 finish uses more compound.
- Closets and stairwells are not modeled — add their areas as separate entries by adjusting length and width.
- Prices are planning ranges checked November 2026, not quotes.
Sources
- GA-216 / ASTM C840 — application and finishing of gypsum panels (fastener spacing).
- USG and CertainTeed installation guides — sheet handling and coverage guidance.
- Big-box retailer listings — board and consumable pricing, checked November 2026.
Last reviewed: November 20, 2026, by the YardMath Editorial Team.