Square Footage Calculator — Total Any Room in Seconds
Add every room, split L-shaped spaces into rectangles, and get your total in square feet, square meters, square yards and acres — with an optional cost estimate.
A 12×14 ft room is 168 sq ft — about 15.6 m².
Square footage calculator
Add every room or area, one row at a time. For L-shaped spaces, split them into two rectangles.
Floor area only. For material orders, add the waste allowance on the flooring or tile calculator, not here.
How the square footage calculator works
Square footage is the floor area of a space, and for anything rectangular it is one multiplication: length × width. Real houses are rarely one clean rectangle, so this calculator sums as many rooms or areas as you need — bedrooms, hallway, closets, an alcove — and gives you one total in square feet, square meters, square yards and acres.
The math, step by step
room area = length × widthtotal = room 1 + room 2 + … + room n
- Square meters: sq ft ÷ 10.764.
- Square yards: sq ft ÷ 9.
- Acres: sq ft ÷ 43,560.
- L-shape: split the space into two rectangles that share an edge, calculate each, then add them.
- Closets and nooks count when you are buying flooring — include them as their own rows.
Measure inside the walls, at floor level, and round to the nearest inch rather than the nearest foot — a room you call "12 by 14" that is really 12 ft 4 in by 14 ft 2 in is 16 square feet bigger than you think, and flooring is bought per box, not per guess. If a wall runs at an angle, square off the largest rectangle that fits and treat the leftover triangle separately (base × height ÷ 2).
Worked example: an L-shaped living room
- Main area: 18 ft × 12 ft = 216 sq ft.
- Alcove: 8 ft × 6 ft = 48 sq ft.
- Total: 216 + 48 = 264 sq ft (24.5 m²).
- Flooring: with a 10% waste allowance you would order 290 sq ft of material — the flooring calculator turns that into boxes and underlayment rolls.
- Paint: the walls of this room are a different calculation (perimeter × height, minus doors and windows) — use the paint calculator for gallons.
One number, three jobs: the same 264 sq ft total prices laminate at $2.50 per square foot ($660 of material), checks against your appraisal measurements, and feeds every material calculator on this site.
Quick reference tables
| Space | Typical size | Area |
|---|---|---|
| Half bathroom | 5 × 8 ft | 40 sq ft |
| Bedroom | 12 × 12 ft | 144 sq ft |
| Primary bedroom | 14 × 16 ft | 224 sq ft |
| Living room | 16 × 20 ft | 320 sq ft |
| Two-car garage | 20 × 20 ft | 400 sq ft |
| Great room | 20 × 24 ft | 480 sq ft |
| Square feet | Square meters | Square yards | Acres |
|---|---|---|---|
| 100 | 9.29 | 11.1 | 0.0023 |
| 500 | 46.45 | 55.6 | 0.0115 |
| 1,000 | 92.90 | 111.1 | 0.0230 |
| 2,000 | 185.81 | 222.2 | 0.0460 |
| 5,000 | 464.52 | 555.6 | 0.1148 |
What counts as square footage depends on who is measuring. Real-estate listings usually follow ANSI rules (finished, conditioned space measured from the exterior walls), while flooring and paint need the working numbers you take yourself, room by room. This calculator is for material shopping and project planning — it is not an appraisal.
Measuring tips that save a whole box
Measure twice applies to flooring more than anywhere else, because flooring is the one material the store will not always take back — special orders and open boxes rarely return. A few habits keep the count honest:
- Measure inside the baseboards, not the baseboards. Flooring goes under the baseboard line, but it stops at the wall face. Measuring to the outside of trim adds phantom area.
- Use inches and divide at the end. "12 ft 6 in × 14 ft 3 in" entered as 12.6 × 14.3 quietly overstates the room by almost five square feet. Convert to decimal feet properly: 6 inches is 0.50, not 0.6.
- Walk the diagonal. If the two diagonal corner-to-corner measurements of a room differ by more than an inch, the walls are out of square — plan your first row off the longest straight wall, and let the waste slider absorb the taper.
- Measure closets and hallways as rooms. They are the first areas forgotten and the first to run short. Add each as its own row above.
- Photograph the tape. A phone photo of every measurement with the room in frame beats memory at the store counter.
And one rule that saves arguments: the person who will install the floor should make (or check) the final list. Installers see the cuts that estimators miss — doorjambs, vents, the last row against a crooked wall.
What your square footage buys
Once you know the area, price check it per square foot. Typical material-only ranges (November 2026, vary by region and grade):
- Laminate: $1–$3 per sq ft.
- Luxury vinyl plank: $2–$5 per sq ft.
- Engineered hardwood: $4–$8 per sq ft.
- Solid hardwood: $6–$12 per sq ft.
- Tile: $1–$15+ per sq ft depending on material.
A 264 sq ft room therefore spans about $264 of basic laminate to well over $2,000 in solid oak — before padding, transitions and installation. Material price is only half the equation; labor (if hired) typically doubles the total. Get three local quotes for installed work, and buy 10% extra material no matter which floor you choose.
Rounding, waste and what to actually order
Square footage is exact; orders are not. Every trade rounds the clean number up — flooring to whole boxes, tile to whole cases, paint to whole gallons, sod to whole rolls — and each trade adds its own waste factor on top. A 264-square-foot L-shaped room is 264 square feet of area but roughly 290 square feet of purchase once waste and rounding are applied.
Two habits keep the gap honest. First, measure every alcove, closet and bay window separately — that is where the first five percent hides, and forgetting one is the classic short-order mistake. Second, keep each room’s dimensions in a notes app so a reorder matches the original count exactly. When a contractor quotes per square foot, ask which number the quote uses: net area, gross area, or their own on-site measurement. On the same floor plan the three can differ by ten percent, and that difference is bigger than most waste factors.
Frequently asked questions
How do I calculate the square footage of a room?
Multiply length by width: a 12×14 ft room is 168 sq ft. Measure inside the walls at floor level, and for irregular rooms split the space into rectangles, calculate each, then add them together.
Is a 12×12 room 144 square feet?
Yes — 12 × 12 = 144 sq ft, or about 13.4 square meters. That is a good mental anchor: a normal bedroom is roughly 140–160 sq ft.
How do I calculate the square footage of my walls?
Walls are a different area: perimeter × height, minus doors and windows. A 12×14 room with 8 ft ceilings has about 344 sq ft of wall after subtracting two doors and two windows — the paint calculator does this for you.
How many square feet is in a square of roofing?
One roofing 'square' is 100 sq ft. It shows up in roofing quotes, not flooring, but it explains why roofers quote by the square — a 2,000 sq ft roof is 20 squares.
How do I convert square feet to square meters?
Divide by 10.764. So 1,000 sq ft ≈ 92.9 m². The calculator shows both units at once, and the feet/meters toggle converts your room dimensions too.
How do I measure an L-shaped room?
Split it into two rectangles along the inside corner. Measure each rectangle's length and width, compute each area, and add them. Enter both as separate rows above and the total appears automatically.
Do closets count in square footage?
For flooring and paint, yes — measure them as their own rows. For real-estate listing square footage, finished closets inside the conditioned space are typically included under ANSI rules; verify locally.
Does square footage include the garage?
For living-area comparisons, attached garages are usually excluded from a home's listed square footage. For your own project math, the garage is just another area — measure it and add it as a row if you are flooring or painting it.
Assumptions and limitations
- Areas are computed from the numbers you enter; accuracy depends on your measurements.
- The calculator adds flat rectangular areas — it does not subtract stairs, split slopes, or handle curved walls (split those manually).
- No waste allowance is added here; each material calculator applies its own.
- Cost estimates are material-only planning ranges, checked November 2026, not quotes.
Sources
- NIST Handbook 44 — exact foot-to-meter conversion factors.
- ANSI Z765-2021 — how listing square footage is measured (for context only).
- Big-box retailer listings — flooring material price ranges, checked November 2026.
Last reviewed: November 20, 2026, by the YardMath Editorial Team.