Rebar Calculator — Bars, Weight & Cost for Slabs

Enter your slab size, spacing and bar size and get bars, total length, weight and 20-ft bar count — for a full grid in both directions.

Quick answer

A 20×20 ft slab at 16 in spacing needs 640 ft of #4 rebar — about 428 lb.

Rebar calculator

Results update as you type. Your numbers are saved in the page link, so you can bookmark or share them.

Units
Slab dimensions
ft
ft
Price (optional)
640
total linear ft
428
pounds of rebar
32
20-ft bars to buy
Bars along length16 bars × 20 ft
Bars along width16 bars × 20 ft
Slab area400 sq ft

Counts are for a full grid in both directions, with a bar at each edge. Laps are not added — allow a 30 in lap per joint if your slab runs longer than 20 ft in either direction. Rebar sizes and spacing for structural work come from your drawings or engineer, not this calculator.

How the rebar calculator works

This rebar calculator sizes a full reinforcement grid for a rectangular slab or footing. Enter the slab length and width, the on-center spacing between bars, the bar size, and the price you expect to pay per 20-ft bar. The calculator returns four results: how many bars run each way, the total length of rebar in feet, the total weight in pounds, and how many standard 20-ft bars you need to buy.

Each input works like this. Length and width are the finished dimensions of the slab in feet. Spacing is the on-center distance between parallel bars — 16 inches is a common choice for residential slabs, and the calculator defaults to it. Bar size is the rebar designation: #3 (3/8 in), #4 (1/2 in), or #5 (5/8 in) are the sizes most slab work uses, and each has a fixed weight per foot. The price per bar is what your supplier charges for one 20-ft stick.

The math, step by step

bars along length = ceil(width × 12 ÷ spacing) + 1
bars along width = ceil(length × 12 ÷ spacing) + 1
total length = bars along length × length + bars along width × width
weight = total length × lb per ft  ·  20-ft bars = total length ÷ 20 (round up)
  • Bar weights: #3 (3/8 in) → 0.376 lb/ft; #4 (1/2 in) → 0.668 lb/ft; #5 (5/8 in) → 1.043 lb/ft; #6 (3/4 in) → 1.502 lb/ft.
  • The +1 bar: each direction needs a bar at both edges plus one every spacing interval — that is why the count is ceil(dimension ÷ spacing) + 1.
  • Standard length: rebar is sold in 20 ft lengths (also 40 ft); the bar count rounds up because a 20 ft bar cut to 12 ft still costs a full bar.
  • Laps: bars longer than 20 ft are lapped, not butt-joined — allow a 30 in lap (about 40 bar diameters) per joint, which this calculator does not add; add one extra bar per run if your slab is longer than 20 ft.
20 ft 20 ft slab, top view — #4 rebar grid at 16 in (yellow)
A 20 × 20 ft slab at 16 in spacing: 16 bars each way, 640 ft of #4 rebar, about 428 lb.

The math runs in four steps, all in plain terms. First, the calculator works out how many bars run parallel to the slab length. It converts the slab width from feet to inches (width × 12), divides by the spacing, rounds up, and adds 1. Rounding up matters because spacing rarely divides the slab evenly, and the grid has to reach the far edge. Adding 1 accounts for the bar that sits on each boundary — a 20-ft slab at 16-in spacing does not need 15 bars, it needs 16, because you count the first bar at the edge, not zero. Each of these bars is as long as the slab length. Second, the same calculation runs across the width: number of bars equals length × 12 ÷ spacing, rounded up, plus 1, with each bar as long as the slab width. Third, total footage is simply the two bar counts multiplied by their lengths and added together. Fourth, weight is total footage multiplied by the weight per foot of your bar size: #3 rebar weighs 0.376 lb/ft, #4 weighs 0.668 lb/ft, and #5 weighs 1.043 lb/ft. Finally, the calculator divides total footage by 20 and rounds up, because rebar is sold in 20-ft sticks and you cannot buy a fraction of one.

A practical tip on the count: the extra bar at each edge is easy to forget when you order by hand, and forgetting it means coming up one stick short on each run. The rounding-up step has the same effect — whenever the spacing does not land exactly on the slab edge, the last gap gets covered by a bar, not by hope.

A second tip concerns waste. The calculator's bar count is the theoretical minimum: it assumes offcuts from one bar are used on the next run. Real jobsites rarely cooperate. Cuts, end damage, and laps at splices all consume extra steel, so most contractors add a waste allowance of roughly 10 percent when ordering rather than buying the bare minimum. Buying three or four extra sticks is cheap insurance against a second trip to the supplier; running short mid-pour is not. The calculator gives you the exact grid so you can make that judgment call with real numbers instead of guesses.

Worked example: a 20 × 20 ft slab at 16 in spacing

Here is the full worked example using the calculator's defaults: a 20 × 20 ft slab, bars at 16-in spacing, #4 rebar.

  1. Bars running along the length: convert the width to inches — 20 ft × 12 = 240 in. Divide by spacing: 240 ÷ 16 = 15. Round up and add 1: 15 + 1 = 16 bars, each 20 ft long.
  2. Bars running along the width: the length converts to the same 240 in, so 240 ÷ 16 = 15, plus 1 = 16 bars, each 20 ft long.
  3. Total length: 16 bars × 20 ft = 320 ft running one way, plus 16 × 20 = 320 ft the other way. Total: 320 + 320 = 640 ft of rebar.
  4. Total weight: #4 rebar weighs 0.668 lb per foot, so 640 ft × 0.668 = 427.5 lb.
  5. Bars to buy: each stick is 20 ft, so 640 ÷ 20 = 32 exactly. No rounding needed — you need 32 bars of 20 ft.
  6. Cost: at the planning price of $10 per 20-ft bar, 32 × $10 = $320.

The even split in this example — 16 bars each way — happens because the slab is square and 16 inches divides 240 inches exactly. Change the spacing to 18 inches or make the slab rectangular and the two directions will come out different, which is why running the calculator beats doing it once in your head.

Quick reference tables

Speed sheetThe table below shows three common slab sizes run through the same formula, so you can sanity-check your own numbers against a known result

The table below shows three common slab sizes run through the same formula, so you can sanity-check your own numbers against a known result. The first two use 16-in spacing with #4 bars; the third is a larger slab at 18-in spacing with #5 bars.

The table below shows three common slab sizes run through the same formula, so you can sanity-check your own numbers against a known result
SlabSpacing & barBars each wayTotal lengthWeight20-ft bars to buy
10 × 10 ft16 in, #49 + 9180 ft120.2 lb9 bars
20 × 20 ft16 in, #416 + 16640 ft427.5 lb32 bars
30 × 40 ft18 in, #528 + 211,680 ft1,752.2 lb84 bars

Bar weight per foot is fixed by the bar's diameter, so you can convert any total length to weight even outside these examples. Standard mill length is 20 ft, and bars are also sold in 40 ft on many markets.

Bar weight per foot is fixed by the bar's diameter, so you can convert any total length to weight even outside these examples
Bar sizeDiameterWeight per footStandard length
#33/8 in0.376 lb/ft20 ft (also 40 ft)
#41/2 in0.668 lb/ft20 ft (also 40 ft)
#55/8 in1.043 lb/ft20 ft (also 40 ft)
#63/4 in1.502 lb/ft20 ft (also 40 ft)

What rebar costs

Rebar pricing moves with the steel market and varies by region, so treat the figures here as national planning ranges checked November 2026 — never as quotes. At roughly $10 per 20-ft bar, #4 rebar works out to about 50 cents per foot of bar. That matches the worked example: a 20 × 20 ft slab needing 640 ft of #4 costs 32 × $10 = $320 in rebar at the planning price.

Keep the scope of that number in mind. It covers bars only. Chair supports that hold the grid at the right height, tie wire, and any delivery fee are separate purchases, and none of them are included in the calculator's output. Larger bar sizes cost more per stick than the $10 figure, so if you step up from #4 to #5, expect the per-bar price to rise and adjust your planning budget accordingly. Get a quote from your supplier before ordering, since local prices can sit above or below the national range.

Frequently asked questions

How much rebar does a 20×20 slab need at 16-inch spacing?

A 20 × 20 ft slab with #4 bars at 16-in on-center spacing needs 16 bars running each way, for a total of 640 ft of rebar. That weighs 427.5 lb and comes from 32 standard 20-ft bars. At the national planning price of $10 per 20-ft bar, the steel runs about $320 before chairs, tie wire, and delivery are added.

Why does the calculator add 1 bar in each direction?

Bars are placed on center, meaning the spacing measures from the middle of one bar to the middle of the next. The first bar sits at the slab edge, and the count starts there rather than at zero. Without adding 1, you would undercount every run — a 20-ft slab at 16-in spacing needs 16 bars, not 15 — and the outermost gap would end up wider than your spec.

What bar size should I use for a residential slab?

#4 rebar, which is 1/2 inch in diameter and weighs 0.668 lb per foot, is the most common choice for residential slabs and drives the calculator's defaults. #3 bars at 0.376 lb/ft suit lighter duty work, while #5 bars at 1.043 lb/ft appear in heavier slabs and footings. Your local building code and your plans call the final size; the calculator sizes whichever bar you select.

How does the calculator convert total feet into the number of bars to buy?

Rebar comes from the mill in standard 20-ft sticks, with 40-ft lengths also available. The calculator divides your total footage by 20 and rounds up, because you buy whole sticks. For the 20 × 20 ft example, 640 ft ÷ 20 = 32 exactly. When the division does not come out even, the rounding up gives you the extra stick that covers the short final piece.

Does the bar count include a waste allowance?

No. The calculator returns the theoretical minimum: it assumes every offcut from a 20-ft stick gets used on a later run. Real jobs add waste from cuts, damaged ends, and laps at splices, so most contractors order roughly 10 percent more than the calculated count. The exact number is still worth having, because it turns the waste decision into a small, deliberate margin rather than a guess.

Why is weight worth calculating, not just length?

Suppliers sometimes price or stock rebar by weight, and weight tells you what the handling actually involves. The conversion uses fixed unit weights: 0.376 lb/ft for #3, 0.668 lb/ft for #4, and 1.043 lb/ft for #5. A 20 × 20 ft slab at 16-in spacing uses 640 ft of #4, which comes to 427.5 lb — useful to know before you plan how many trips it takes to haul.

Does spacing change the total much?

Spacing changes the bar count directly, so it moves total footage, weight, and cost in step. Tighter spacing means more bars: at 16 in on a 20-ft run you count 16 bars, while opening to 18 in reduces the count. The larger slab in the table shows the flip side — a 30 × 40 ft slab at 18-in spacing with #5 bars needs 28 bars one way and 21 the other, totaling 1,680 ft.

Is this calculator only for slabs, or can I use it for footings?

The same grid math works for footings, since a footing is just a narrower, deeper rectangle reinforced in both directions. Enter the footing's length and width and your spacing, and the calculator returns bars, footage, weight, and the 20-ft bar count. What it does not do is pick your bar size or spacing for you — those come from your plans, your soil conditions, and local code requirements, so confirm them before ordering.

Assumptions and limitations

  • The grid runs the full length and width of the slab in both directions, in a single layer, with bars at uniform on-center spacing.
  • One bar is counted at each slab edge, which is why 1 is added to each direction's bar count.
  • Bar counts round up to whole bars, and 20-ft bar quantities round up to whole sticks, since partial bars cannot be purchased.
  • Weight is calculated from standard unit weights: 0.376 lb/ft for #3, 0.668 lb/ft for #4, and 1.043 lb/ft for #5.
  • The bar count assumes offcuts from 20-ft sticks are reused; no waste allowance, laps, or edge offsets are added automatically.
  • Pricing uses a national planning range of $10 per 20-ft bar, checked November 2026, and excludes chairs, tie wire, and delivery.

Sources

  • Concrete Reinforcing Steel Institute — crsi.org
  • Nucor Corporation — nucor.com
  • The Home Depot — homedepot.com
  • Lowe's — lowes.com

Last reviewed: November 20, 2026, by the YardMath Editorial Team. Formulas re-checked against manufacturer datasheets; national price ranges refreshed quarterly.