Wallpaper Calculator — Rolls Needed by Wall Size

Enter your wall size, doors and windows and get the rolls you need — one single roll covers about 28 sq ft after pattern matching, with a 15% waste allowance.

Quick answer

A 12×8 ft wall with one door needs 4 single rolls of wallpaper.

Wallpaper calculator

Results update as you type. Your numbers are saved in the page link, so you can bookmark or share them.

Units
Wall dimensions
ft
ft
Waste allowance (pattern repeat)
15%
Price (optional)
4
single rolls (rounded up)
2
double rolls (same paper)
Wall area (gross)96 sq ft
Net area (after openings)75 sq ft
Area with waste86.3 sq ft

Includes a 15% waste allowance for pattern matching and trimming — adjust with the slider. Rolls always round up to whole rolls. Buy all rolls from the same dye lot.

How the wallpaper calculator works

This calculator tells you how many rolls of wallpaper you need to cover a wall. You enter the wall's length and height, the number of doors and windows on that wall, and the calculator does the rest.

The math works in three steps.

The math, step by step

net area = length (ft) × height (ft) − 21 × doors − 15 × windows
rolls = net area × 1.15 ÷ 28 (round up)
double rolls = net area × 1.15 ÷ 56 (round up)
  • Doors and windows: a standard door deducts 21 sq ft (3 × 7 ft); a standard window deducts 15 sq ft (3 × 5 ft).
  • One single roll: a standard 21 in × 33 ft roll is 57.75 sq ft gross, but pattern matching and trimming leave about 28 sq ft usable.
  • Pattern repeat: large repeats waste more — the 15% default covers typical repeats; big bold patterns can need 20% or more.
  • Double rolls: twice the length of a single roll, about 56 sq ft usable — buy half as many.
12 ft 8 ft door (21 sq ft deducted)
A 12 × 8 ft wall with one door: 96 sq ft gross, 75 sq ft net after the door.

First, it finds the net wall area. That's the full wall area minus the openings you won't paper. The wall area is length times height. Each standard door is treated as 21 square feet, and each standard window as 15 square feet. So:

net area = L × H − (21 × doors) − (15 × windows)

If your door or window is unusually large or small, the difference is usually small enough that rounding up to a whole roll absorbs it.

Second, the calculator adds a 15% waste allowance. Wallpaper almost always produces offcuts. You trim at the ceiling, at baseboards, around door and window casings, and — the big one — at pattern repeats. To match a pattern, each strip may need to start a few inches above or below where the last one ended, so the bottom of the strip gets cut off and thrown away. On busy patterns, that wasted piece can be a substantial part of every strip. Multiply the net area by 1.15 to account for all of this.

Third, it converts square footage into rolls. A single roll of wallpaper covers roughly 28 square feet of wall after pattern matching and trimming. That number is smaller than the gross area printed on the roll label, because a standard 21-inch by 33-foot roll measures 57.75 square feet gross, and about half of that can be lost to pattern matching and trimming, depending on the pattern. The formula:

single rolls = ceiling of (net × 1.15 ÷ 28)

The result is always rounded up to a whole roll, since you can't buy a partial roll.

If you're buying double rolls — which is how many manufacturers package wallpaper — the same math applies with a usable coverage of about 56 square feet per double roll:

double rolls = ceiling of (net × 1.15 ÷ 56)

A double roll is simply two single rolls sold as one unit, so a job that takes 4 single rolls takes 2 double rolls. The wall coverage is identical; only the packaging and price differ. Always check which unit the retailer's price refers to before comparing, because a $45 single roll and a $45 double roll are not the same amount of paper.

The calculator defaults to a 12-foot by 8-foot wall with one door, 15% waste, and a price of $45 per roll. Change any of those to match your room.

Worked example: a 12 × 8 ft wall with one door

Here's the full calculation for the default wall: 12 feet long, 8 feet high, with one standard door and no windows.

  1. Gross wall area. 12 × 8 = 96 square feet.
  2. Subtract the door. One standard door counts as 21 square feet. 96 − 21 = 75 square feet net. There are no windows, so nothing else comes off.
  3. Add the waste allowance. Multiply by 1.15 for trimming and pattern matching: 75 × 1.15 = 86.25 square feet of paper you need to have on hand.
  4. Convert to single rolls. Divide by the usable coverage per single roll: 86.25 ÷ 28 = 3.08. Round up to a whole roll, and you need 4 single rolls.
  5. Convert to double rolls. Divide the same 86.25 by the double-roll coverage: 86.25 ÷ 56 = 1.54. Round up, and that's 2 double rolls. Same paper, different packaging.
  6. Cost. At $45 per roll, 4 single rolls × $45 = $180 for the wall. If your retailer prices double rolls, price out 2 double rolls at the per-double-roll price instead — don't multiply the single-roll figure by the double-roll price, or you'll budget twice as much paper as you need.

A few practical notes on this example. With only about 8 square feet of headroom over the 4-roll estimate, this wall has little slack. If the pattern is large or the wallpaper is a special order with a long lead time, it's worth buying one extra roll so a damaged strip doesn't stall the job mid-project. Also, check that your door is close to the standard 21 square feet (roughly 3 by 7 feet); an oversized door or a wide window opening changes the net area, and the calculator lets you adjust for that.

Quick reference tables

Speed sheetThis table shows roll counts for common wall sizes, each with a standard door and windows subtracted before the 15% waste allowance

This table shows roll counts for common wall sizes, each with a standard door and windows subtracted before the 15% waste allowance:

This table shows roll counts for common wall sizes, each with a standard door and windows subtracted before the 15% waste allowance
Wall sizeOpeningsNet areaSingle rolls
12 × 8 ft1 door75 sq ft4
15 × 9 ft1 door + 2 windows84 sq ft4
20 × 8 ft2 doors + 1 window103 sq ft5

Roll coverage depends on how the paper is packaged. These are the usable coverage figures the calculator uses after pattern matching and trimming:

Roll coverage depends on how the paper is packaged
Roll typeUsable coverage
Single roll≈ 28 sq ft
Double roll≈ 56 sq ft

What wallpaper costs

Wallpaper cost comes down to rolls × price per roll. Using the default price of $45 per roll, the example wall — 12 × 8 feet with one door, 4 single rolls — comes to $180. The 15 × 9 wall in the table above also lands at 4 rolls, or $180 at that same price, while the 20 × 8 wall with two doors and a window needs 5 rolls, or $225.

These are national planning ranges checked November 2026, not quotes. Actual roll prices vary a lot by brand, material, and pattern complexity, and some retailers price in double rolls rather than single rolls — always check which unit the price refers to before you compare. If your retailer sells double rolls, divide your single-roll count by two and price that.

Keep in mind that $45 per roll covers paper only. Paste or pre-pasted consideration, primer or wall liner for problem walls, and installer labor are separate line items not included in the roll price. Budget one extra roll beyond the calculated count for pattern-heavy or special-order papers so a miscut strip doesn't hold up the job.

Frequently asked questions

How many rolls of wallpaper do I need for a 12×8 ft wall with one door?

That wall has 96 sq ft of raw area, and subtracting one 21 sq ft door leaves 75 sq ft of net area. With the 15% waste allowance and a single roll covering about 28 sq ft after pattern matching, you need 4 single rolls, which works out to 2 double rolls. At $45 per roll, that's $180.

What formula does the calculator use?

Net area = length × height − 21 sq ft per door − 15 sq ft per window. Then rolls = net area × 1.15 ÷ 28, rounded up to the next whole single roll. Double rolls = net area × 1.15 ÷ 56, also rounded up.

Why is there a 15% waste allowance?

The 15% covers offcuts from pattern matching, trimming, and short drops around doors and windows. The calculator multiplies your net area by 1.15 before dividing by the coverage per roll, so the waste is built into the final roll count.

How much does a single roll of wallpaper actually cover?

A standard single roll is 21 inches wide by 33 feet long, which is 57.75 sq ft gross. But after pattern matching and trimming, about half of it is lost, so figure on roughly 28 sq ft of usable coverage per single roll. A double roll gives about 56 sq ft usable.

How much will my wallpaper cost?

The calculator uses a default price of $45 per roll. Multiply the number of single rolls by your price per roll. In the default example, 4 single rolls × $45 = $180.

How many rolls for a larger wall with doors and windows?

Here are three examples from the reference table, each with 1 door at 21 sq ft and windows at 15 sq ft each: a 12×8 ft wall with one door is 75 sq ft net and needs 4 rolls; a 15×9 ft wall with one door and two windows is 84 sq ft net and needs 4 rolls; a 20×8 ft wall with two doors and one window is 103 sq ft net and needs 5 rolls.

What's the difference between a single roll and a double roll?

A single roll covers about 28 sq ft usable after pattern matching; a double roll covers about 56 sq ft usable, twice as much. Retailers often price wallpaper per single roll but sell it in double rolls, so the calculator shows both counts. The 12×8 ft example comes out to 4 single rolls or 2 double rolls.

Any tips before I order?

Measure each wall's length and height, then subtract 21 sq ft per door and 15 sq ft per window rather than skipping openings entirely — it saves real money. Keep the 15% waste allowance even if your pattern looks small; trimming and pattern repeats eat more paper than most people expect. Order all rolls at once so the dye lots match, and check your roll's actual dimensions against the 28 sq ft usable figure.

Assumptions and limitations

  • A single roll covers about 28 square feet of wall after pattern matching and trimming; a double roll covers about 56 square feet.
  • A 15% waste allowance is added to the net wall area to cover trimming and pattern-repeat offcuts.
  • Each standard door is subtracted at 21 square feet and each standard window at 15 square feet.
  • Default inputs are a 12 ft × 8 ft wall with 1 door and 0 windows.
  • Roll counts are always rounded up to the next whole roll; partial rolls can't be purchased.
  • The default price of $45 per roll is a national planning range checked November 2026, not a quote, and covers paper only.

Sources

  • Brewster Home Fashions — brewsterhomefashions.com
  • Graham & Brown — grahambrown.com
  • Sherwin-Williams — sherwin-williams.com
  • Wallcovering Installers Association — wallcoveringinstallers.org

Last reviewed: November 20, 2026, by the YardMath Editorial Team. Formulas re-checked against manufacturer datasheets; national price ranges refreshed quarterly.